Dewalt DWS709 Miter Saw Manual

The Dewalt DWS709 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility. It features an adjustable miter system, a durable motor, and a laser guide for accurate cuts. Ideal for both professional contractors and DIY enthusiasts, this miter saw is equipped with a range of features to enhance your woodworking projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 12-inch blade, double bevel capability, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Installation

Unpack and inspect contents. Place the miter saw on a stable work surface.

1. Ensure the saw is unplugged before installation.
2. Attach the saw to a workbench or stand for stability.
3. Connect the dust collection system if available.
4. Adjust the miter and bevel settings as needed.

WARNING! Always ensure the saw is securely mounted before use.

First-Time Setup

Power on the saw and familiarize yourself with its features.

1. Adjust the blade height for the material you will be cutting.
2. Set the miter angle according to your project requirements.
3. Test the laser guide alignment before making cuts.
4. Practice making cuts on scrap material to ensure accuracy.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

• Blade Size: 12 inches.
• Motor Power: 15 Amp.
• Bevel Capacity: 0° to 48° left and right.
• Miter Capacity: 0° to 60° right, 0° to 50° left.
• Weight: 56 lbs.
• Dust Collection: 50% dust reduction with vacuum attachment.
• Warranty: 3 years limited warranty.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the front of the saw. The laser guide can be activated via a switch on the handle.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

1. Connect the dust collection system to the port on the saw.
2. Use compatible blades for different cutting applications.
3. Ensure all accessories are securely attached before operation.

Tip: Regularly check connections to ensure safety and performance.

Operating the Miter Saw

Follow these steps for safe operation:

1. Ensure the workpiece is securely clamped.
2. Power on the saw and allow the blade to reach full speed.
3. Make the cut, keeping hands clear of the blade.
4. Power off the saw and wait for the blade to stop before removing the workpiece.

WARNING! Never reach over the blade while it is in motion.

Maintenance and Care

Regular maintenance is essential for optimal performance.

• Keep the saw clean and free of debris.
• Inspect the blade for wear and replace as necessary.
• Lubricate moving parts according to the manufacturer's instructions.
• Store the saw in a dry place when not in use.

Safety Information

Always follow safety guidelines when operating the miter saw:

• Wear safety goggles and hearing protection.
• Keep hands away from the blade and use push sticks when necessary.
• Do not operate the saw while under the influence of drugs or alcohol.

Regulatory Information

This product complies with applicable safety standards and regulations. For more information, visit the Dewalt website or contact customer support.

Troubleshooting

Reset: Follow the manufacturer's instructions for resetting the saw if necessary.

Service: For support, contact Dewalt customer service.