Dewalt DW716 Miter Saw Manual

The Dewalt DW716 is a 12-inch dual bevel compound miter saw designed for precision and versatility. It features a powerful motor, adjustable miter and bevel settings, and a durable construction, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, adjustable miter settings, laser guide, and dust collection port.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Adjustable Miter Settings	For accurate miter cuts from 0 to 50 degrees.
Laser Guide	Helps in aligning cuts accurately.
Dust Collection Port	Connects to vacuum for cleaner workspace.
Powerful Motor	Delivers high performance for tough cutting tasks.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Secure the saw to the workbench using clamps.
Connect the dust collection system if available.
Ensure the power cord is safely routed and not a tripping hazard.

WARNING! Ensure the saw is unplugged during installation to avoid injury.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter angle using the miter gauge.
Set the bevel angle as needed for your cuts.
Test the saw with scrap material to ensure settings are correct.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 Amp.
Bevel Capacity: 0 to 48 degrees left and right.
Miter Capacity: 0 to 50 degrees left and right.
Weight: 50 lbs.
Dust Collection: 1-1/4 inch port.
Laser Guide: Yes.

Controls and Settings

Access miter and bevel adjustments using the knobs located on the saw.

Safety Switch: Ensure the safety switch is engaged before operating.

Adjust the blade height using the height adjustment lever for different material thicknesses.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Connect the dust collection system to the port.
Attach any additional accessories as per the manual instructions.

Tip: Always check connections before operating the saw.

Operating the Miter Saw

Follow these steps to operate the saw safely and effectively.

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and allow the blade to reach full speed.
Make the cut smoothly and steadily.
Turn off the saw and wait for the blade to stop before removing the material.

WARNING! Keep hands clear of the blade at all times.

Safety Features

The Dewalt DW716 includes several safety features to protect the user.

Blade Guard: Automatically covers the blade when not in use.
Safety Switch: Prevents accidental start-up.
Sturdy Base: Reduces vibration and enhances stability.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down surfaces.

CAUTION! Avoid using liquids or abrasive cleaners on the saw.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and connections.
Inaccurate cuts	Misalignment	Check miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset procedures if available.

Service: For service inquiries, contact Dewalt customer support.