Dewalt DW710 Miter Saw Manual

The Dewalt DW710 is a powerful 12-inch miter saw designed for precision cutting in various materials. It features a robust motor, adjustable miter and bevel settings, and a durable construction that ensures longevity and reliability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Adjustable Miter Angles	Allows for accurate angled cuts up to 50 degrees.
Laser Guide	Helps ensure precise cuts by projecting a line on the workpiece.
Dust Collection Port	Connects to a vacuum for cleaner workspace.
Ergonomic Handle	Provides comfort during extended use.

Installation

Unpack and inspect contents. Place on a stable work surface.

Secure the saw to a workbench using clamps.
Connect the dust collection system if available.
Ensure the power cord is properly routed and not a tripping hazard.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw; ensure all settings are correctly adjusted.

Set the miter angle using the adjustment knob.
Adjust the bevel angle if necessary.
Check the blade alignment and height.

CAUTION! Ensure the blade is properly installed before use.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Capacity: 50 degrees left and right.
Bevel Capacity: 0 to 45 degrees.
Weight: 50 lbs.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access miter and bevel adjustments via the knobs located on the saw.

Safety Features: Blade guard, electric brake, and trigger lock.

Connecting Devices

Ensure all devices are compatible with the miter saw.

Use appropriate extension cords rated for the saw's power requirements.
Connect the dust collection system to the port.

Tip: Always check connections before powering on the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always use both hands to operate the saw.

WARNING! Keep hands clear of the blade at all times.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Inspect power cords for damage.
Lubricate moving parts as recommended in the manual.

Safety Information

Always wear appropriate safety gear, including eye protection and hearing protection.

CAUTION! Read the manual thoroughly before operating the saw.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not spinning	Blade guard engaged	Ensure guard is not obstructing blade.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose blade	Tighten blade securely.

Service: For further assistance, contact Dewalt customer service.