Dewalt DHS716 Miter Saw Manual

The Dewalt DHS716 is a powerful 12-inch double bevel sliding miter saw designed for precision and versatility in cutting various materials. It features a robust motor, dual bevel capability, and an adjustable miter system, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, LED work light, adjustable miter stops, and a sturdy base.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Dual Bevel Capability	Allows for bevel cuts in both directions.
LED Work Light	Illuminates the cutting area for better visibility.
Adjustable Miter Stops	For quick and accurate miter cuts at common angles.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Check that all safety features are functioning before use.

WARNING! Ensure the saw is securely mounted to prevent accidents.

First-Time Setup

Power on the saw and follow the setup instructions in the manual.

Adjust the blade height and angle as needed.
Calibrate the miter and bevel settings for accuracy.
Test the saw with scrap material before starting your project.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0° to 48° left and right.
Miter Capacity: 0° to 60° left and 0° to 50° right.
Weight: 56 lbs.
Dimensions: 30 x 22 x 18 inches.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The power switch is easily accessible for quick operation.

Safety Features: Blade guard, electric brake, and safety lockout switch.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the saw to a power source using the provided power cord.
Use extension cords rated for the saw's power requirements if needed.

Tip: Keep the work area clear of obstructions.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Never reach across the blade while it is in motion.

Safety Features

The Dewalt DHS716 includes several safety features to protect the user, including a blade guard, electric brake, and a safety lockout switch.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Do not use abrasive cleaners; keep the saw away from moisture.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Recalibrate miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down before resuming.

Reset: Refer to the manual for reset procedures if available.

Service: For service inquiries, contact Dewalt customer support.